Custom pvc air blowing shoe making machine factory | SONC

Custom pvc air blowing shoe making machine factory | SONC

SONC has been seriously tested in its manufacture. The tests include mechanical properties test, leak detection, and other non-destructive tests.

1. Product introduction:

▶Suitable for TPR, PVC, PUR (blowing) and other raw materials; 

▶Production of single, double and three-color negatives, shoelaces, etc.; 

▶Applicable to the production of transparent belt surface; 

▶10 pairs of molds are produced at the same time.

2.Optional components:

▶Drying Hopper

▶Servo Energy Saving System


Products Details
  • Feedback
  • With strong R&D strength and production capabilities, SONC now has become a professional manufacturer and reliable supplier in the industry. All our products including pvc air blowing shoe making machine are manufactured based on the strict quality management system and international standards. pvc air blowing shoe making machine We promise that we provide every customer with high-quality products including pvc air blowing shoe making machine and comprehensive services. If you want to know more details, we are glad to tell you.Investing in this product may seem like a costly investment at the moment, but in the long run, it is worth it. It can be used to increase production and save valuable time.

    Ⅰ.Product Features:

    █Ultra-wide formwork, super-large clamping design; 

    █Industrialized man-machine interface, Plc program control system; 

    █Special material resistance needle structure design, heat insulation and leakage prevention;

    █Multiple safety protection, safe and reliable; 

    █Mould water cooling system, fast shaping, beautiful products; 

    █Optional servo system, energy saving and environmental protection.


    Ⅱ.Main parameter:

    ItemUnitEB306DEB308DEB310D
    raw material
    PVC,TPR and crystal
    Station numberStations6810
    Screw diametermm50*3
    Screw speedR/min0-160
    Injection volumeml390*3
    Injection pressureMPa70*3
    Clamping forceTons80*2
    Motor PowerKw15+11
    Mechanical Dimensionsmm6700*2500*16507000*2500*16507500*2800*1650
    Machine weightKg98001060011400

    By means of perfect system and advanced management, Sonc machinery will ensure all production of Automatic Pvc Three-color Slippers Upper Injection Molding Machine Eb3 Series completed on schedule.


    Ⅲ.Product picture:


    Ⅳ.Description of optional components:


    ▶Drying Hopper:

    PVC crystal granule raw material is easy to be affected by moisture, so the water vapor generated during plasticization in the barrel will corrode the machine components and reduce the service life of the equipment. Moreover, the product will produce bubbles after being damp, which will affect the appearance and quality of the product. The dryer can dry the raw materials before entering the machine, which avoids the above situation well.

    PVC crystal granule raw material is easy to be affected by moisture, 

    so the water vapor generated during plasticization in the barrel will 

    corrode the machine components and reduce the service life of the 

    equipment. Moreover, the product will produce bubbles after being 

    damp, which will affect the appearance and quality of the product. 

    The dryer can dry the raw materials before entering the machine, which 

    avoids the above situation well.


    ▶Servo Energy Saving System:

    Ordinary motors are output at constant speed regardless of the actual 

    use of the load, and oil pumps are also output at constant pressure. 

    When the pressure and flow are low, people use constant value output, 

    and the power loss is large. The servo energy-saving system feeds back 

    the pressure and flow data of the load to the control system to adjust the 

    speed and pressure, which can greatly save the energy consumption of the 

    motor at low pressure and low flow.




    Ⅴ.Auxiliary equipment:


    ▶Cooling Tower:

    used for cooling the hydraulic oil of the machine and the feeding place of the screw.


    ▶Crusher:

    Used to crush defective products or waste and recycle them.


    ▶Color mixing machine:

    Put in the toner and mix the raw materials into the desired color.


    Ⅵ.Advantages:

    █Can provide non-standard customized product services according to your requirements;
    █According to your technical requirements and drawings, OEM authorization processing;
    █Established nearly 10 years ago, stable and healthy, with a strong product production capacity;
    █With more than 30 national patented technologies, the product technology has the leading advantage;


    Basic Information
    • Year Established
      --
    • Business Type
      --
    • Country / Region
      --
    • Main Industry
      --
    • Main Products
      --
    • Enterprise Legal Person
      --
    • Total Employees
      --
    • Annual Output Value
      --
    • Export Market
      --
    • Cooperated Customers
      --
    Send your inquiry

    Send your inquiry

    Choose a different language
    English
    हिन्दी
    Tiếng Việt
    italiano
    français
    русский
    Português
    Español
    العربية
    Current language:English