Install the Cooling Fan C Foot

Install the Cooling Fan C Foot

Footwear injection molding machine, due to the need to meet the simultaneous production of multiple molds, improve production efficiency, shorten the single-mode production cycle, and convert the cooling process of the original injection molding machine mold from the clamping state to the non-clamping state for cooling. The cooling in the non-clamped state is cooled by a fan, so that when other molds are injected, multiple molds that have been injected with materials are shaped by staged cooling, which greatly increases the efficiency. The video shows the whole process of fan installation.

SEND INQUIRY NOW
CONTACT US
Telephone: +86-595-85777088
WhatsApp: +8618965705158
Send your inquiry

Detailed explanation of fan installation steps: 


  1. 1. Install the support feet of the fan frame to connect to the body; 

  2. 2. Install the fan elbow bracket on the support feet in sections, and lock the screws;

  3. 3. Install the fan on the elbow and fix it firmly;

  4. 4. Connect the wires of the fan to the wires of the host;

  5. 5. Check the rotation direction of the fan rotor;

  6. 6. The installation is completed when the wind direction is correct, otherwise the connection of the fan wires needs to be adjusted.


IF YOU HAVE MORE QUESTIONS,WRITE TO US
Just tell us your requirements, we can do more than you can imagine.

Send your inquiry