SONC▏Sandals injection molding machine/Step11:install component wires

install component wires：

Generally, the injection part and the central frame of the goose shoe injection molding machine are separated, and its skid, brake and fan devices are separated from the injection body. The mechanical part is installed, and the electrical circuit part needs to be installed.

It is mainly installed according to the following steps:

1. Find the corresponding wiring position of each component at the central frame, where there is the wire number and code;

2. Find the corresponding label or coded wiring terminal on the injection body;

3. Connect the wire ends with corresponding marks or codes to the corresponding wiring positions;

4. There are three main wiring positions:

A. Wiring of skid type device;

B. Wiring of rotary table brake device;

C. Check whether the wind direction is correct after connecting the electric wires of the fan.

• Year Established
  --
• Business Type
  --
• Country / Region
  --
• Main Industry
  --
• Main Products
  --
• Enterprise Legal Person
  --
• Total Employees
  --
• Annual Output Value
  --
• Export Market
  --
• Cooperated Customers
  --