SONC▏Slipper machine/Step06:adjust level of rotary table

adjust level of rotary table:

After the installation of the rotary table, we need to adjust the level of the rotary table. 

The adjustment steps are as follows:

1. Prepare transparent water pipe and adjustable wrench;

2. The transparent water pipe shall be used for irrigation, and there shall be no bubble in the middle;

3. Two people hold two ends of the water pipe separately, align the water level at one end with the upper surface of the rotary table, and observe the water level at the other end;

4. If the water level is not aligned with the rotary table, adjust the external support feet or heads until the water level is flush with the upper surface of the rotary table;

5. The observation point shall be selected at the external support point, and each support point shall be observed and adjusted;

6. After each adjustment, it is necessary to tighten the fastening screws of the adjusted supporting points to prevent looseness.

• Year Established
  --
• Business Type
  --
• Country / Region
  --
• Main Industry
  --
• Main Products
  --
• Enterprise Legal Person
  --
• Total Employees
  --
• Annual Output Value
  --
• Export Market
  --
• Cooperated Customers
  --