Goose type footwear injection molding machine is mainly composed of goose head assembly, turntable assembly, rack assembly and other parts. Other parts are packed in the rack assembly during transportation.
Before the installation of the machine, the components shall be disassembled and counted, and then the installation shall be implemented step by step according to the installation video on the website. The video is divided into 18 steps, starting from 01-18.
Applicable to all models with goose head component connection.
This video is step 05.
install rotary table:
The rotary table of the machine is mainly used to place multiple sets of molds and drive the molds to rotate into the mold locking device. It is generally assembled from several parts.
The installation of the rotary table is mainly divided into the following steps:
1. The inner ring of the rotary table is close to the inner support and placed on the support roller of the inner support;
2. The outer ring of the rotary table is placed on the outer support wheel;
3. Several parts of the rotary table shall be installed in turn and lapped according to the lapping interface;
4. Install the locating pin of the rotary table lapping interface;
5. Install and tighten the locking screws of the rotary table;
6. Adjust the level of the upper plane of the rotary table with a transparent water pipe;
7. Adjust the outer support feet to make full contact with the rotary table.
GET IN TOUCH WITH US
The first thing we do is meeting with our clients and talk through their goals on a future project.
During this meeting, feel free to communicate your ideas and ask lots of questions.
They are all manufactured according to the strictest international standards. Our products have received favor from both domestic and foreign markets.
They are now widely exporting to 200 countries.